FAQs – Installation | BottleLess.com

Can we install the bottleLess cooler ourselves?

Can you have someone install the cooler for me?

How difficult is it to install an BottleLess.com cooler?

Installing a BottleLess Cooler cooler is very similar to hooking up an automatic ice maker in your refrigerator. For most customers, it takes less than an hour. Your new cooler will arrive with everything you need to get set up, including step-by-step instructions. If you opt to install the cooler yourself and then change your mind later, you can always request one of our installers to come and install it for you. You can read our bottleLess water cooler Installation page for more informations.

How long does it take to install a bottleLess cooler?

Will the installation kit include all supplies for every situation?

The kit that we include is suitable for a majority of our customer’s installations. If there are instances where additional supplies are needed, it’s primarily when the water source is more than 25′ feet from the bottleLess cooler. In this situation, you would need to purchase additional length of waterway. We sell 25′ foot sections of 1/4″ waterway in our Shop, or you can get it at any hardware store.

How close to a water source does the cooler have to be?

It is easiest the install your new bottleLess cooler when it is in the same room (or near) the water source, but it absolutely doesn’t have to be. Our step-by-step instructional videos teach you how to get the waterway from a water source to the cooler, whether it’s in the same room or not. Please note that the coolers come with 25′ feet of waterway. So, if you are more than 25′ feet away, make sure you get extra waterways from our shopping cart.

If you have one of our technicians install the cooler, they can run the waterway into a different room if necessary. Please note, however, that extremely long distances may require an additional cost for the installation.

How large is the waterway?

How strong is the waterway?

Does your installation training teach me how to “snake” the waterway inside the walls and over the drop ceiling?

If I don’t want to have the waterway inside of the walls, is there another option?

I’m replacing an existing bottleLess cooler. Do I have to pay for installation?

Can I order installation at a later date if I try to install the cooler myself and change my mind?

Do you have a help desk?

How do I get started?

Still need help finding the answer?